A single thickness of fabric that is doubled and stitched to the top of a pant.
When two identical pieces of fabric are placed back-to-back at the top of a pant, raw edges turned inside, and joined with two widely spaced rows of stitching. the pant body is inserted
between and along one edge.
Warmth to Weight Ratio
A measurement used to evaluate the effectiveness of an insulated product in relation to weather conditions and the environment. The insulation with the best rating is down. Down provides the best warmth to weight ratio over almost any other insulation material, which is why you will see down garments and sleeping bags as the primary choice for use in almost every high altitude, cold weather expedition.
In woven fabric, the yarns that run lengthwise and is interwoven with the fill (weft) yarns.
A type of knitted fabric construction in which the yarns are formed into stitches in a lengthwise manner. Warp knits are generally less elastic than weft knits. Common examples of warp knits are tricot knits and raschel knits.
Materials that will not fade or shrink during washing or laundering. Labels should be read by the consumer to assure proper results. Do not confuse with "wash-and-wear".
Ability of a garment to be washed by hand or in a washing machine and require little or no ironing. Also referred to as "easy care".
A small pocket in the garment, typically located just below the front waistband of men's trousers and used to
accommodate change or a pocket watch.
Fabrics that have been treated with a finish which cause them to shed water and resist water penetration, but are still air-permeable. Treatments can include wax coatings, resins, silicones, and fluorine derivatives. Such treatments do not close the pours of the fabric, while waterproof finishes do.
See our Elements Fabric Stain Protection
A degree by which water is able to penetrate a fabric. Not to be confused with water-repellent. However, the terms are often used interchangeably.
A term applied to fabrics whose pores have been closed, and therefore, will not allow water or air to pass through them.
The process of forming a fabric on a loom by interlacing the warp (lengthwise yarns) and the filling (crosswise yarns) perpendicular to each other. Filling is fed into the goods from cones, filling bobbins or quills, which carry the filling yarns through the shed of the loom. Filling may also be inserted into the material without the use of a shuttle, as in the case of a shuttleless loom. The three basic weaves are Plain, Twill, and Satin. All other weaves, no matter how intricate, employ one or more of these basic weaves in their composition. Variations on the basic weaves make a variety of different fabric surfaces and fabric strengths.
In woven fabric, the filling yarns that run perpendicular to the warp yarns.
A type of knitted fabric in which yarns are formed into stitches in widthwise manner. Common examples of weft knits are circular knits and flat knits.
Weight of Cloth
This term describes the variety of ways that fabric is sold: Ounces per linear yard, Yards per pound, and Ounces per square yard.
The outer layer of a bonded or welded garment, such as a jacket.
There are two basic methods for applying bonding or welded seams. The first method uses an adhesive film, and the application of heat to glue or laminate two substrates together. The second method involves gluing or attaching two fabrics, using ultrasonic technology. The creation and channeling of high frequency vibratory waves cause a rapid buildup of heat in synthetic fabrics to create the bonding.
1. A strip of material seamed to a pocket opening as a finishing, as well as a strengthening device. 2. A raised or swelled lap or seam. 3. A covered cord or ornamental strip sewed on a border or along a seam. 4. In knitting, it is flat-knitted separately and then joined to the fabric by looping or hand knitting, as the heel to the stocking. 5. A ribbed piece of knit goods used in forming the end of a sleeve or sock to prevent rolling or raveling.
Interlining for pocket welts
A woven fabric with a very steep and compacted twill appearance on the face of the goods. End-uses for the fabric include dress woolens, worsteds, or wool blends, and many types of uniforms.
A very broad term which implies any goods bleached and finished in the white condition. Some of the cotton white goods are muslin, cambric, dimity, lawn, longcloth, organdy, voile, etc.
Some fabrics, such as men's shirtings or broadcloth, poplin, madras, etc., are made on a dobby or jacquard loom so the white motifs will appear on a white background.
The ability of a fiber or a fabric to disperse moisture and allow it to pass through to the surface of the fabric, so that evaporation can take place.
Dispersing or spreading of moisture or liquid through a given area by capillary action in a material.
A converted cotton cloth, dyed black, brown or gray, and given a firm starched, plain calender finish, and used for interlinings in mens and
boys clothing to give body to the garment.
The ability of a fabric to act against or oppose the penetration of wind or air, but it is not totally windproof.
The ability of a fabric to be nonpermeable to wind and air.
Comes from the Anglo-Saxon "owef". It is another name for the warp or warp yarn. Sometimes in advertising textiles, the word has been used to imply filling yarn, and made to interchange with the other term, weft.
Usually associated with fiber or fabric made from the fleece of sheep or lamb. However, the term "wool" can also apply to all animal hair fibers, including the hair of the Cashmere or Angora goat or the specialty hair fibers of the camel, alpaca, llama, or vicuna.
A lightweight worsted fabric with a more or less crinkly appearance, obtained by
using warp yarns that are tightly twisted in alternate directions. The term is
often applied to lightweight worsted fabrics for women's wear that have little
or no crepe surface.
A tightly woven fabric made by using only long staple, combed wool or wool-blend yarns. The fabric has a hard, smooth surface. Gabardine is an example of a worsted fabric. A common end use is men's tailored suits.
The textile process of manufacturing spun yarns from staple fibers usually over 3 inches in length. The main operations are carding, combing, drafting, and spinning.
Fabrics composed of two sets of yarns. One set of yarns, the warp, runs along the length of the fabric. The other set of yarns, the fill or weft, is perpendicular to the warp. Woven fabrics are held together by weaving the warp and the fill yarns over and under each other.
A resistant to wrinkling created through the use of a variety of finishes and treatments.
Similar to resiliency. It is the ability of a fabric to bounce back after it has been twisted, wrinkled, or distorted in any way.